Product description
SNT-70 target drone is a low-speed target aircraft, which takes into account the training and equipment testing of the navy, army, and air force. It has the functions of one-key ignition, pre-planning routes, re-planning routes, and online uploading and switching routes at any time. It supports multi-aircraft formation, can simulate saturation attacks, can simulate the flight characteristics and radar characteristics of aircraft and cruise missile targets, and can be equipped with software Mass towed targets, tracer tubes, active jamming equipment and other loads can be used for air defense training of antiaircraft artillery, missile units, electronic jamming, aerial reconnaissance, aerial photography, etc., to meet the needs of the army’s primary training and equipment testing of aerial targets .
System composition
The SNT-70 target drone system consists of the main parts of the body platform, flight control system (navigation, flight control, actuator, power supply system, etc.), telemetry and control system, fuel power system, booster rocket system, parachute recovery device and mission load. composition.
Features
With Beidou/inertial integrated navigation precise route control capability;
Support rocket-assisted zero-length takeoff, which can take off on the ground or at sea;
Support parachute recovery, with automatic parachute throwing function after recovery and landing;
It has program-controlled flight capability, and can automatically and stably fly according to preset and online planned routes. The route supports online real-time revision and re-planning function, and the route can be manually edited and modified at any time during the flight.
It has commanded flight capability and can fly stably in accordance with ground control commands.
With parameter return function, it can return flight parameters (attitude, altitude, airspeed, pointing, angular rate, latitude and longitude, speed, heading, etc.) and engine parameters to the flight controller and ground telemetry equipment in real time.
It has complete safety protection functions such as autonomous security control, emergency response (automatically open parachute, hovering, self-destruction in emergency), one-key homing and self-destruction by command;
Support one-stop multi-aircraft fully automatic coordinated formation flying function, and support multiple tactical formations;
Optional installation of lumber ball, tracer tube, towed target and other mission loads;
Ultra-low-altitude sea-skimming flight capability, remote control and telemetry throughout the entire ultra-low-altitude flight;
Navigation/link anti-interference, safe flight under interference failure conditions;
The infrared-enhanced payload supports automatic ignition according to instructions or ignition according to instructions;
It supports remote control of the towed target load to be automatically placed in the order of instructions or placed on demand.
Equipped with night flight lights to support night flight.
Index parameter
Long: 2.0m
Wingspan 3.2m
Maximum level flight speed: ≮80m/s
Endurance: ≮70min (no load), ≮30min (full load)
Maximum flying altitude: ≮7000m (altitude)
Maximum take-off altitude: ≮5000m (altitude)
Maximum take-off weight: ≮60kg (4500m above sea level)
Maximum load weight: ≮6kg
Remote control telemetry radius: ≮100km (under the condition of visibility at a relative height ≮800m)
Communication frequency: 820~928MHz (adjustable within the range), support different frequency bands for selection
Multi-aircraft flight capability: ≮16 aircraft (1 station control)
Wind resistance level: ≮6
Under the condition of not exceeding the maximum load weight, one or more of the following load combinations can be selected for installation:
Tracer tube: Y-50H type or XMP-130D type, 2 pcs;
Infrared decoy bomb: HY-2 type, 6 pieces;
Long Bo ball: diameter φ≮120mm, 2 pcs;
Soft drag target: 2 pcs.
Recycling landing speed: ≯5m/s
Environmental adaptability: -40℃～+70℃
Launcher
(1) Body weight ≯40kg
(2) Environmental adaptability: -30°C ~ +50°C
(3) Composed of front support, fixed frame, fixed force rod, rear support, tailstock, etc.
(4) With the function of safety lock before launch
(5) Lightweight and small design, portable, convenient for field operations
Auxiliary equipment
Auxiliary equipment consists of a set of spare parts and assembly tools
(1) A set of spare parts is used for flight loss, component inspection, thrust line adjustment and engine maintenance, etc.;
(2) Auxiliary equipment provides assistance for the daily use of the target aircraft, completing thrust line adjustment and engine maintenance.
(3) Environmental adaptability: -30°C~+50°C.
Ground measurement and control station
The ground measurement and control station is used for route simulation, data analysis, status monitoring, flight and mission control, etc. It is composed of an antenna and erection components, a portable measurement and control host, and telemetry software.
(1) Remote control function: can send remote control commands to the aircraft.
(2) Telemetry function: It can receive the data returned by the aircraft and display it on the ground terminal computer, and the communication data is continuous and uninterrupted.
(3) Route pre-planning and upload function: automatic flight route pre-planning can be carried out, and route uploading can be completed. You can edit and modify the route at any time during the flight. Supports waypoints ≮300.
(4) Main telemetry information: It can effectively monitor and display flight parameters and engine status information, including attitude, altitude, airspeed, pointing, angular rate, latitude and longitude, speed, heading and other aircraft status information, as well as engine speed, temperature and pressure. status information.
(5) Telemetry system software: It has the function of loading and displaying electronic maps.
(6) Measurement and control frequency: different frequency bands can be used, and the working frequency band corresponds to the communication frequency of the target aircraft. The working frequency that has been approved and filed in the Military Electromagnetic Spectrum Management Office can be preferentially selected.
(7) Measurement and control radius: ≮100km (relative height ≯800m, full view, no obstruction)
(8) Number of remote control channels ≮ 40 remote control command channels.
(9) Number of telemetry channels ≮ 50 telemetry command channels.
(10) Working time ≮2h (battery-powered).
(11) Environmental adaptability: -30°C～+50°C.
