ZY8DN05-TN Distributed Redundancy Flight Control Computer

1 CPU is powered by NXP POWERPC P2020
2 DDR3 has a capacity of 1GB, ROM 1GB, NVSRAM 256KB and FLAHS 16Gb*8bit
3 CCDL function is supported, S400B communication mode defined by IEEE1394B protocol is adopted, including 1 sending bus and 3 receiving buses, each of which supports the rate of 400Mbps
4 Single node MIL-1394B system bus (Nodes are optional, supports up to three nodes), conform to AS5643 protocol
5 16-channel discrete input interface, 16-channel discrete output interface (discrete type configurable)
6 8-channel analog input/output interface
7 1-channel 100M/1000M Ethernet
8 4-channel RS422 interface, 2-channel RS232 interface
 

Product Description

ZY8DN05-TN DistributedRedundancy Flight Control Computer is based on the analysis of similar productsat home and abroad, and combined with the latest technical development trend aswell as the latest needs of users. ZY8DN05-TN takes NXP's high-performancelow-power processor P2020 as its core, supports VxWorks and other dedicated flight control real-timeoperating systems, and provides rich peripheral interfaces,flight parameter recording and other flight control computer proprietaryfunctions by MIL-1394B bus of CCDL and external system bus. It is suitable forairborne, shipborne and vehicle-mounted applications in harsh workingenvironments.

 

Performace Parameters

Maximum CPU operating frequency…………….400MHz

Nominal Voltage…………………………………..DC24V

Protection Grade…………………………………..IP23

Temperature……………………………………….-10℃~55℃

Relative Humidity…………………………….…….95%condensation

Waterproof and Dustproof Grade………………….IP65

Case Dimensions………………………………….. (L×W×H) (215±0.5)mm× (91±0.5)mm × (319±0.5)mm